Categories
Windows

Discord Mic Not Working Error on Discord {Solved}

Discord app users are facing a certain kind of glitch and that they can hear other members of the channel but they are not audible to them. Discord is now preferred over Skype by a lot of gamers as it is mostly error free and even if there are any then the discord team fix them quite quickly. However, this one issue seems to trouble a large number of users lately. This has also been observed that discord generally works fine in its web app version but creates a problem with microphone on its desktop version.

If you are facing the same this same issue then this article might be helpful for you. Here are some ways through which you can fix this discord mic issue. However, you might have to try more than on way to check which one is working best for you. Before trying any of the below given method to troubleshoot your discord mic, firstly just make sure that your headsets are working because most of the time it’s not the mic that is not working it’s your headset.

If your headset is working absolutely fine then, you can explore the below given options to find the perfect solution to your problem.

Method 1: Logging out of Discord

If you are in the middle of a game and your discord mic is not working and you need a quick fix then, the best possible way is to log out from your discord mic and then log back in. You can follow the below mentioned steps.

Step 1:

If you want to logout of the desktop version of discord then firstly, click on the User Settings icon on the bottom left corner of your screen.

Step 2:

After that, keep scrolling till you find the Log out option. When found, click on it and again click on the log out button to confirm. You might have to repeat this procedure a few times before it actually registers.

Step 3:

Finally, re-insert your credentials to log back in. Check if the mic started working on not.

There is a possibility that this method will fix your issue but it is not a permanent solution and the problem may arise again. To resolve the issue permanently you should check out other methods.

Method 2: Running Discord as Administrator

If the above mentioned method does not work in our case then you can try this method as it is one of the easiest and effective methods. This method is the first recommended solution by Discord customer support. As the app uses UDP, there is a possibility that it does not have all the required privileges by your system. Therefor you should trying running it with administrator privileges so as to transmit your data to your team mates.

There is nothing much you have to do to run Discord as administrator. Just right-click on the desktop icon and select Run as Administrator. If this does not solve your problem ten you can resort to the other method.

Method 3: Tweaking the Automatic Input Sensitivity settings

If any of the above mentioned method is not working for you the there is a possibility that your Automatic Input Sensitivity is disabled in your Discord setting. When this option is disabled then, your manual sensitivity tends to send the slider to the extreme left making your mic unable to pick up sounds.

But if this not the case then may be your automated input sensitivity is the one causing trouble as it is generally regarded as buggy. Therefore, it might help if you try and go manual. Follow the steps mentioned below to implement the method.

Step 1:

Firstly, click on the User Settings icon on the bottom left corner of your Discord window.

Step 2:

After that, under app settings, click on Voice and Video.

Step 3:

Next, go to input sensitivity and enable the automatically determine input sensitivity option if it is not already enabled. Now, check if the bar below lights up in solid green while you speak into the mic or not. If it does only then move to the next step.

Step 4:

Now, disable the same toggle and place your manual slider somewhere in the middle. If the manual bar is pulsating while you speak then your problem has been resolved.

Method 4: Selecting your headset microphone under Input Device

The above mentioned methods might not be effective in your case but there is no need to worry, we have a few other methods as well. One of the reasons why your team mates are unable to hear you might be because Discord is not using the right microphone.

This is a problem with Discord if the choice of input device is left on default. This usually happens with gaming laptops and computers that have built in microphones. Discord will use those inbuilt microphones instead of your connected headsets if you do not specify which ones to use. Follow the steps given below to check.

Step 1:

Firstly, click on the User Settings icon on the bottom left corner of your Discord window.

Step 2:

After that, under app settings, click on Voice and Video.

Step 3:

Now, from the drop down of input device select the microphone from your headset.

Step 4:

At last, make sure that the input volume slider of your microphone is at extreme right.

Method 5: Disabling Exclusive Mode in Windows

In Windows, there are certain applications that are configured to take exclusive control over the audio device driver. This creates a problem with Discord. As some headsets when connected with Discord silence there microphone if any of the exclusive mode setting is enabled. Therefore, you should check for that so as to disable these settings if they are enabled. Follow the below mentioned steps to do so.

Step 1:

At first, in the bottom right corner, right-click on the sound/volume icon and then select recording device from the options.

Step 2:

Next, select the microphone of your headset and go to properties.

Step 3:

Select the Advance Tab and then deselect all the checkboxes under Exclusive Mode and then hit on Apply.

Step 4:

Finally, reboot your system and then check if the issue has resolved or not.

Method 6: Resetting Voice Settings

This method to reset voice settings of your Discord is one of the most successful methods to resume the normal functionality of your Discord desktop application. This method is also helpful if you face any glitch due your new headsets. Follow the steps mentioned below to implement the method.

Step 1:

Firstly, click on the User Settings icon on the bottom left corner of your Discord window.

Step 2:

After that, under app settings, click on Voice and Video.

Step 3:

Next, scroll until you spot Reset Voice Setting and then click on it.

Step 4:

After that, hit on OK and wait for Discord to reinitialize.

Step 5:

At last, Reconnect your headset and check if the glitch has been removed or not.

Method 7: Changing the Input Mode to Push to Talk

If none of the above mentioned methods work for you then the last thing that you can try is to change your input mode to push to talk. There will be a bit of inconvenience as every time you want to speak something, you need to press the button first.

To enable Push to Talk

Step 1:

On the bottom left corner, check for your username and then click on the settings icon besides it.

Step 2:

Next, scroll down and tap on Voice and Video.

Step 3:

Now, to enable this feature, tick the box next to Push to Talk.

To configure

Step 1:

First, go to settings and find Keybinds option.

Step 2:

After that, on the top right corner, you will see an option to add keybinds. Click on it.

Step 3:

Now, in actions select, Push to Talk. Then click on Record Keybind button and press the key that you wish to set as Push to Talk Toggle.

Step 4:

After that, click on Stop Recording to save your preference.

Step 5:

Finally go back to Setting > Voice and Video and at the same section where you selected Push to Talk, you will find a slider namely Push to Talk Release Delay. This slider modifies the time taken by Discord to cut your voice signal after you press the toggle. The lowest time is 20ms but it is advised that you set it a bit high for convenience.

Conclusion

In this article, you can find all the possible and effective ways to resolve the Discord mic not working issue. Before implementing any method just go through the whole article and then select the suitable method. Even if one method does not work, you can always try the next one and at the end your issue will be resolved.

Categories
Windows

Modern Setup Host has Stopped Working [SOLVED]

Why Modern Setup Host has Stopped Working? Windows 10 is the latest version of the Windows by Microsoft. Being the latest version it is better than the earlier versions of Windows in so many ways. You are provided with many benefits that comes with Windows 10. So, if you are thinking of upgrading your old version of Windows to Windows 10 then there is nothing to worry about. You can easily upgrade Windows  7, Windows 8 and Windows 8.1 without losing any applications, data and settings. However, Windows Vista and Windows XP can not be upgraded to Windows 10.

In case of Windows XP and Windows vista, you will have to do a clean install. Now, before performing the clean install, you need to back up all of your data (or just the important one) to a network storage or USB flash disk or cloud storage. You can skip this part if your data is not important and you do not mind losing it. In that case you can go for the clean installation without any backup. Also, you need to check whether your motherboard support the newer operating system.

Your Windows machine can be upgraded to Windows 10 by using the following three methods:

  1. Now a days, some vendors are manufacturing “notebooks” without any DVD RW drives. The first method is to upgrade your Windows using the bootable DVD or USB.
  2. Second method is very obvious. You just have to upgrade your windows machine by using the Windows update.
  3. Third method is to upgrade your windows machine using the Media Creation Tool.

But upgrading is not as easy as it seems. Many users wanted to upgrade and came across some upgrading issues. One of them was an error message Modern Setup Host has Stopped Working. This issue arise when the user is trying to upgrade Windows 7, Windows 8 and Windows 8.1 machine to Windows 10. Some of the various reasons for the occurrence of  this issue are : problem with upgrade process, wrong system configuration, etc.

Modern Setup Host Has Stopped Working Windows 10

If you have come across this problem then do not worry we have a list of methods that you can implement to fix Modern Setup Host has Stopped Working issue and upgrade to Windows 10.

Method 1: Check for Hard Drive space

One of the most common reason why people are unable to upgrade their Windows machine is because they do not have enough available space on their system partition. It is estimated that the Media Creation Tool kit will require 8 GB for downloading the upgrade of machine. We suggest that you have more than just 8 GB of free space on your computer as you will require additional free storage for saving data, applications and work, etc. So if you are asking how much additional storage you will actually need for all your data and apps then we would recommend at least 15 GB+.

Before any of this you are also required to check the free hard drive space on your computer and then delete all the unnecessary data and applications.

You can also use the following tips to tackle Modern Setup Host has Stopped Working error:

1. If you have unnecessary data on your computer, you need to delete it from the system partition.

2. If you need to release some space but cannot delete the date because it’s important, then what you can do is back up all the important data to a USB flash disk, network shared storage, external storage or cloud storage ( For example: Google drive, OneDrive, etc.)

Method 2: Prepare Windows Machine for Upgrade

This method require some system changes,  which includes disabling startup programs, changing regional Windows setting and disabling services that are not related to Microsoft. Given below is the procedure for Windows 7, Windows 8 and Windows 8.1. Using this method we can easily prevent any potential problems occurred due to the conflict between various applications.

First of all, you have to disable all the services that are not related to Microsoft. The following methods work for Windows 7, Windows 8 and also for Windows 8.1.

Step 1: Hold the Windows logo and then press R key.

Step 2: To open System Configuration, type msconfig and then press the enter.

Step 3: Click on Services.

Step 4: Click on Hide all Microsoft Services at the bottom of the left corner.

Step 5: Click on Disable all at the bottom of the right corner.

Step 6: Now, click on Apply.

Step 7: Then click on OK.

 In the next step we will aim to disable all startup programs.

In case you are using Windows 7:

Step 1: Hold the Windows logo and then press R key.

Step 2: To open System Configuration, type msconfig and then press the enter key.

Step 3: Select Startup tab.

Step 4: Click on Disable all in the bottom right corner of the screen.

Step 5: Now click on Apply.

Step 6: Click on OK.

Step 7: Restart your computer system.

Step 8: Run your Windows upgrade.

But in case you are using Windows 8 or Windows 8.1:

Step 1: Hold the Windows logo and then press R key.

Step 2: To open the System Configuration, type msconfig and then press the enter key.

Step 3: Select the Startup tab.

Step 4: Now, click on Open Task Manager.

Step 5: Again select the Startup tab.

Step 6: Disable the desired applications by right clicking on the application and choosing Disable.

Step 7: Then close Task Manager.

Step 8: Restart your computer system.

Step 9: Run your Windows upgrade.

The final step includes changing the regional settings via Control Panel.

In case you are using Windows 7:

Step 1: Hold the Windows logo and then press R key.

Step 2: Now, type Control Panel and then press the enter key to open Control Panel.

Step 3: Click on View by Category.

Step 4: Select Clock, Language and Region.

Step 5: Then select Region and Language.

Step 6: Click on Location tab.

Step 7: Choose United States under the Current Location.

Step 8: Then click on Keyboards and Languages.

Step 9: Click on Change Keyboards.

Step 10: Click on General tab.

Step 11: Choose English (United States) for default input language.

Step 12: Click on Apply.

Step 13: Then, click on OK.

Step 14: Close the Control Panel.

Step 15: Restart your computer system.

Step 16: Run your Windows Upgrade.

But in case you have Windows 8 or Windows 8.1 then:

Step 1: Hold the Windows logo and then press R key.

Step 2: Now, type Control Panel and then press the enter key to open Control Panel.

Step 3: Click on View by Category.

Step 4: Select Clock, Language and Region.

Step 5: Then select Region and Language.

Step 6: Click on Location tab.

Step 7: Choose United States under the Home location.

Step 8: Click on Apply.

Step 9: Now click on OK.

Step 10: Click on Language to add another language under Clock, Language and Region.

Step 11: Click on Add a language.

Step 12: Choose English and then click on Open.

Step 13: Now, Choose English (United States) and then click on Add.

Step 14: Under Languages, click on your previous language and then click on Remove.

Step 15: Now close the Control Panel.

Step 16: Restart your computer system.

Step 17: Now, upgrade your Windows machine.

Step 18: Afterwards, enable startup programs, services and then change the regional settings.

Method 3: Create Bootable USB and Upgrade your machine to Windows 10

This method requires you to upgrade your Windows version to Windows 10 with the help of bootable USB flash drive. Firstly, you will have to create Window 10 bootable USB that is compatible with notebook and computers.

After which you have to reconfigure the BIOS or UEFI, so that your system can boot from the USB flash drive. After getting that done, you need to boot your Windows with the help of USB and then proceed with the upgrade procedure.

Method 4: Run Disk Clean Up and Delete $Windows.~WS Folder

This method includes running a Disk Clean up and deleting folder $Windows.~WS  from the system partition. Disk clean up can be defined as a utility integrated in the Windows that helps you in the removal of unnecessary files present in your hard disk which is to boot the speed of the Windsor operating system.

In the next step you will have to detect $Windows.~WS  folder. If you upgrade your older Windows to Windows 10 instead of a clean install you will come across two hidden folders on your C drive (or any other drive where you have installed Windows

Method 5: Resume Upgrade by Running Setupprep.exe

This method has helped majority of the users. It includes initiating the upgrade process and then running setupprep.exe file that will resume the last operation rather than starting a completely new one. This method works for Windows 7, Windows 8 and Windows 8.1. Steps to do the same are:

Step 1: Using Media Creation Toolkit run the Windows Upgrade process.

Step 2: Close the Media Creation Tool or Windows Upgrade if you get the error.

Step 3: Hold the Windows logo and then press R key.

Step 4: Now, type: C:\$Windows.~WS\Sources\Windows\Sources\setupprep.exe

Step 5: Press the enter key.

Step 6: Windows Upgrade will be resumed. Wait until the process completes.

Method 6: Use DISM to repair Windows

Deployment Image Servicing and Management or DISM is a command line tool that allows you to mount install.wim, the Windows image file and also do the image servicing that includes configuring, installing, uninstalling and Windows Upgrade.

It is also a part of Windows Assessment and Deployment Kit (or Windows ADK). In this method we will use the Deployment Image Servicing and Management tool to repair Windows image.

Method 7: Run System File Checker

SFC or System File Checker is a command line utility present in Windows. It’s work is to check for any system file corruption. If SFC ever find any issue with system file corruption, it will try to resolve it. But you are required to be the administrator to run a console session for using the SFC utility. SCANNOW is an additional command included in SFC which scans the integrity of all protected system files and repairs the files that are detected with problem when possible.

Method 8: Move User Folder to Default Location

Some users had moved their user profiles from the system partition to some other location which is why Windows Upgrade could not continue the procedure.

If you have not moved your user profile to a new location then skip this method and jump to the next one. But if you have then you have to go back to your previously used profile to default location C:\users\YourUserProfile.

Afterwards, you are required to run the upgrade.

Method 9: Clean Install Windows 10

If none of the above mentioned methods worked for you and you are done with all the troubleshooting and carrying out complicated and lengthy  procedures, then you can easily go for clean installation for the Windows 10. But a clean installation can cause you loss of data, applications and settings which is why  before you do that, make a list of all the important software that you use and will need to reinstall after the upgrade.

Also, do not forget to check if your motherboard, notebook or computer brand name supports Windows 10. And finally you have to backup all your important business or personal data to an external hard disk, USB flash drive, cloud storage or network shared storage.

Final Words

This guide contain all the possible ways of getting rid of the Modern Setup Host has Stopped working error. Go through the methods with alert mind and implement them precisely. You can search for steps of procedures that are not given in this article. We hope this article proved useful to you and at least one of the methods helped you rectify your situation.

Categories
Windows

ERR_CACHE_MISS Error in Google Chrome {Solved}

Google Chrome being the most used web browser in the world comes with a lot of issues during browsing due to its innumerable usage. One of which is ERR_CACHE_MISS error. It is usually shown at the time when a data is re-entered or when the browser does not reach a certain web address.

From its very name it is quite evident that the ERR_CACHE_MISS error is caused due to some cache issues. These issues can be caused by the following:-

1. When the cache files are not obtained by the browser from the website.

2. When the coding of the site entered is improper.

3. Presence of bugs in the browser.

Fixation of ERR-CACHE_MISS in Google Chrome

This error is not just limited to Google Chrome, though in other web browsers the error messages displayed are different. Below are given the ways to solve the issue of ERR_CACHE_MISS in your system.

Method 1: Page Reload

This is the 1st step you should apply when the ERR_CACHE_MISS issue is displayed on the screen. This method works in case there are some issues regarding your network connectivity such as loose or poor connections, change of network during loading of the web page etc.

To being with you need to click on the F5 button on your keyboard or the reload icon beside the address bar.

If this method did not help you fix you ERR_CACHE_MISS issue then there is no problem with your network, and you must go for the other methods discussed below.

Method 2: Clearing the Browser Data

While browsing through different websites, we download stuffs and in progress tend to cancel some tasks; this very action causes accumulation of various corrupted files and cache. This eventually causes the ERR_CACHE_MISS error in your system.  You can overcome ERR_CACHE_MISS error by clearing such data from the browser by following these little steps:

Step 1: Click the Hamburger button on the top left part of the window.

Step 2: Click on the Moe Tools option and select Clear Browsing Data.

Step 3: The check all the items and select The Beginning of Time option in the Obliterate column.

Step 4: Now, click on the Clear Browsing Data option.

Step 5: When you are done with all the procedure, restart the browser.

Even if your problem hasn’t been fixed with this method go for the next discussed below.

Method 3: Disabling the Extensions on the Web Browser

The failure of loading a web page in the browser is caused due to some specific extensions in it blocking them. To overcome this issue follow the steps given below one after the other:

Step 1: Click the hamburger icon in the top left side of the screen.

Step 2: The select the More Tools option and select extensions (this will show you all the extensions present in your web browser).

Step 3: Try out disabling the Ad Blocking extensions if it solves the problem, if not, disable all the other extensions, this will surely solve the ERR_CACHE_MISS error in your system.

You have no reason to panic if this method doesn’t give you the expected results. There are many other steps to fix this issue, which have been discussed below.

Method 4: Using the Command Window Reset the Network

Regarding any network issues this step will fix your cache issue. You need to use the command window to change the network settings to default to fix it. The steps to be followed for this are:

Step 1: Type cmd on the Run Window and open Command Window.

Step 2: The Run the Command Window as an Administrator, doing that you need to type the following commands one by one in the window:

ipconfig /release

ipconfig /all

ipconfig /flushdns

ipconfig /renew

netsh int ip set dns

netsh winsock reset

Now finally when you are all done with the steps explained above, you now need to restart the system. Also, check if ERR_Network_Changed Error arrives in Chrome after this. Now that the network settings have been changed to default all the glitch present in it will be removed and the ERR_CACHE_MISS error won’t be displaying any more. But, even if this method didn’t turn out to be useful to you, don’t worry there are some more ways which can surely overcome the cache issue.

Method 5: Disabling Cache in the Browser

As the above mentioned ways weren’t much of a use you need some advanced techniques. This method requires you to try the settings in Chrome itself. This comprise of the Disabling Cache option, which is meant to solve the ERR_CACHE_MISS error in your system. The steps to be followed are-

Step 1: Press Ctrl + Shift + I followed by F1 key on your keyboard. This will open the settings menu.

Step 2: Then check for the Disable Cache option.

Step 1: When you are done Restart the browser.

This method is bound to solve the issue of ERR_CACHE_MISS error on your browsing screen. But if it does not and if you are still struggling with the problem use the Developer Tools option discussed below.

Method 6: Use Developer Tools

The Developer Tools are tools available in chrome which are used to fix the problems of minor bugs. This very step can also help in the fixation of ERR_CACHE_MISS error in Chrome. Just follow the steps below:

Step 1: Press Ctrl + Shift + I keys all in one time to open the Settings.

Step 2: In the Developer Tools window, you get a list of options, select Applications.

Step 3: Now, click on the Clear Storage option and select the applications you want to clear out.

Step 4: Finally after all the procedures, click on the Clear Site Data option and restart the Browser.

This method is bound to work in solving the ERR_CACHE-MISS error. This very method can also be used to fix the “This Site Cannot Be Reached in Google Chrome” Error. But, in case this method too fails to acquire the objective of cache error fixation, try the last thing possible i.e. resetting the web browser itself.

Method 7: Resetting the Web Browser

When all your efforts are done fixing the ERR_CACHE_MISS error, now try resetting the web browser, which can surely fix your cache error. This method requires the default settings of your browser to come into effect. This can be achieved by the following steps:

Step 1: Click the hamburger icon and open settings.

Step 2: Select Show Advanced Settings option.

Step 3: Now, click on Reset Settings.

Step 4: Click on the Reset Button in the prompt window confirming your actions.

Step 5: Finally, Restart the Web Browser, whichever you are using.

This last method is all you need to fix the ERR_CACHE_MISS error on your browsing screen.

Conclusion

These were the various methods one can use to overcome the cache issue caused in Chrome during browsing through websites. This issue is not much of complications and out the seven different ways discussed above one can surely settle you problem with ERR_CACHE_MISS Error. You can be assured with the part that this issue does not need any additional software to be fixed.

Categories
Windows

This Site Can’t Be Reached Error {Solved}

This Site Cannot Be Reached: Google Chrome is one of the most popular web browsers across the world. The popularity emerges due to its simplicity and speed. The free web browser developed by Google Inc. possesses a fundamental design making it easy for users to access the Internet.

However, users come across a common problem arising out of human or technical glitches. Users have experienced an error message while browsing through a site, reading ‘This site cannot be reached’. The error can hamper the smooth functioning of the user while conducting important tasks over the internet. This annoying error comes with different error codes, and there can be various reasons for the error to arise.

To be more specific, this site cannot be reached error occur due to internal Google Chrome settings, DNS server not responding, out-dated browser version as well as unsuitable TLS version. The error comes with an error message mentioning what went wrong. It is a minor error, and one can resolve it using some technical solutions.

How to Fix This Site Cannot Be Reached Error In Chrome

The solutions mostly refresh the system files to normalize the tasks of certain important functions of the operating system. This restores the settings and solves the error. Below describes the possible solutions to this site can’t be reached problem briefly.

Method 1: Changing Maximum Allowed TLS Version

TLS stands for transport layer security. It performs the task of providing communication security to the entire operating system while connected to the Internet. To be more specific, the system cryptographically communicates the data that transmits to the destination, ensuring security. This type of system is indeed essential to protect private data of the user, and it ensures secure browsing through the internet.

To resolve the problem, merely change the amount of data that transmits to the web browser. Perform the following steps for the same.

Step 1: In the first place, open Google Chrome browser using the administrator mode in your computer.

Step 2: Now, go to the address bar and type ‘chrome://flags’ and then press enter.

Step 3: Then scroll down until you find a drop-down option named ‘Maximum TLS version enabled.’

Step 4: Finally, press the drop-down arrow and set the allowed TLS settings to TLS 1.3 version. The browser was earlier running with the default version. You are good to go now.

Note: There is no save button to save the changed settings. Simply, change the settings and close the browser; the computer will automatically save the settings.

After this, restart the computer to let the new settings take effect. Try to open the webpage with the error ‘This site can’t be reached’ and check if the error persists or not.

Method 2: Disable Experimental QUIC Protocol

In computer language, QUIC is a new experimental protocol. QUIC stands for Quick UDP Internet connection. While opening various sites simultaneously, this experimental protocol QUIC provides security protection to TLS as well as SSL. It also provides a backbone while transferring the data from the website’s server to the computer and provides latency. Some websites use QUIC protocol and do not get filtered during transmission.

Disabling this protocol can actually resolve the error and open the concerned website smoothly. Use the following steps to disable QUIC protocol in your web browser.

Step 1: In the first place, open Google Chrome browser using the administrator mode in your computer.

Step 2: Now, type ‘chrome://flags’ in the address bar and then press enter.

Step 3: Then scroll down until you find a drop-down option named ‘Experimental QUIC protocol’.

Step 4: This must be set at the default version. Click the drop-down menu and select disabled.

Again, there is no save button. After performing the above steps, simply close the web browser. Then, restart your computer so that the new settings take effect.  Try to open the webpage with the error ‘This site can’t be reached’ and check if the error persists or not.

Method 3: Reset TCP/IP Stack

The cause of the problem might be the TCP/IP Stack. TCP/IP stands for transmission control protocol and internet protocol, respectively. Specifically, TCP/IP is a stack of communication protocols used to join the network devices together within the internet. It inculcates the entire internet protocol suite for the smooth functioning of the website user and the provider.

Resetting the TCP/IP Stack is a rather simple solution to resolve the error. Perform the following steps to reset the TCP/IP Stack.

Step 1: To begin with, log the computer on using the administrator mode. Then, Open the Command Prompt by pressing Win logo key + R simultaneously. A run dialog box will be visible on the screen. Type ‘cmd’ and press OK.

Step 2: The Command Prompt will appear on the screen. Now, you need to enter certain commands one by one, which will reset the TCP/IP stack. Enter the following commands chronologically.

ipconfig /release
ipconfig /all
ipconfig /flushdns
ipconfig /renew
netsh int ip set dns
netsh winsock reset

Step 3: After successfully running the above-mentioned commands simply restart the computer so that new settings take effect.

Note: The user should enter the above commands correctly with care; otherwise, there is a chance for some other error to arise.

Now, try to open the webpage with the error ‘This site can’t be reached’ and check if the error persists or not.

Method 4: Restart DNS Client

As mentioned above, one probable cause of this site can’t be reached error can be when the DNS client stops responding. DNS or Domain Name System or the Resolver – is a client built in most computers to issue the domain name queries to the required server. To put it differently, this client conducts the transmission of the query about the domain name. When the DNS server stops responding the error might arise.

Restarting the DNS client, thereby refreshing the client’s functions, can evidently solve the error. Perform the following steps for the same.

Step 1: To begin with, go to the start menu and search for ‘Services’ in the search bar.

Step 2: Right-click on the services option and choose Run as Administrator.

Step 3: Services window will appear on the screen. Various services offered by the operating system will be visible there. Scroll and find the service named ‘DNS Client’.

Step 4: Right-click on the option and select ‘Restart’.

This will restart the entire DNS client services and indeed resolve the problem. Once you complete the above steps restart the system so that the new settings take effect. Now, try to open the webpage with the error ‘This site can’t be reached’ and check if this site can’t be reached error persists or not.

Method 5: Change Your IPV4 DNS Address

The intricate design of IPV4 or Internet protocol version 4 performs mainly two tasks. It identifies the network interface and locates the concerned network to the destination. Internet protocol version 4 (IPv4) comprises of Internet protocol address with a 32-bit number.

Changing the DNS of IPv4 can do the wonder of solving the error. Follow the simple steps to perform the following.

Step 1: In the first place, Right-click on the Wi-Fi icon on the bottom left of the screen.

Step 2: From the two available options, select Open Network and Sharing Center.

Step 3: A new window will pop on the screen. Scroll down and select the ‘Change Network Adapter Settings’ under change your network settings.

Step 4: Network connections window will appear on the screen. Double click on the Wi-Fi icon.

Step 5: A window named Wi-Fi status will pop-up on the screen. From the lower end of the window, select Properties.

Step 6: Then, navigate for Internet Protocol Version 4 (TCP/IPv4) and double click it.

Step 7: Now, you need to change the DNS server addresses. Check ‘Use the following DNS server addresses’ if not checked and enter the below-mentioned addresses.

8.8.8.8 (under Preferred DNS network)

8.8.4.4 (under Alternate DNS network)

Step 8: Next, tick the checkbox ‘Validate settings upon exit’ if unchecked and press okay. Without checking this option, the new settings will not take place.

The above addresses are the Google public DNS server address. They will allow the IPv4 to work smoothly while browsing through Google Chrome. Finally, try to open the webpage with the error ‘This site can’t be reached’ and check if this site cannot be reached error persists or not. If the site does not open try the methods mentioned below.

Method 6: Reset Your Chrome Browser Settings

There might be a chance that you have changed the settings of the Google Chrome browser itself. For instance, adding a certain troublesome extension, unknowingly validating certain settings within the browser or changing the status quo. This might be restricting the browser to load the particular site.

Resetting the Google Chrome Browser settings can resolve the error and restore the settings to the status quo. In order to reset, simply perform the following steps.

Step 1: To begin with, open the Google Chrome browser using the administrator mode. This will allow us to make changes to the device.

Step 2: Now, type ‘chrome://flags’ in the address bar and then press enter.

Step 3: To reset the settings, click on the ‘Reset all to default’ option on the left.

Step 4: Finally, restart the computer so that the new settings can take effect.

Now, try to open the web page with the error ‘This site can’t be reached and check if this site can’t be reached error persists or not. If this does not work, perform the final solution described below.

Method 7: Reinstall Chrome

If the above solutions fail, then the final solution to the problem is reinstalling Google Chrome in your device. The best and final solution available will refresh the browser settings entirely, restore them and thereby resolve the error. To do so, execute the following steps.

Step 1: To begin with, press the windows button and open the ‘Control Panel’ of the device.

Step 2: Navigate for ‘programs and features’ and open it.

Step 3: All the applications installed on the computer will open. Locate Google Chrome.

Step 4: Finally, to uninstall Google Chrome, select it from the list and then click Uninstall.

Step 5: Now, reinstall Google Chrome on your computer. Visit the official website of Google Chrome and install the latest version in your device.

Now, open the newly installed browser and try to open the web page with this site can’t be reached error ‘This site can’t be reached’ and check if this site cannot be reached error persists or not.

Conclusion

The error “this site cannot be reached” can be annoying and hamper the smooth functioning of the user. However, point to note is that the functionalities of Google Chrome are barely at fault here. this site can’t be reached error occur out of certain inconceivable human or technical errors. Hopefully, the above-described solutions help resolve the issue and restore the Google Chrome browser to normalcy.