Categories
Windows

This Site Can’t Be Reached Error {Solved}

This Site Cannot Be Reached: Google Chrome is one of the most popular web browsers across the world. The popularity emerges due to its simplicity and speed. The free web browser developed by Google Inc. possesses a fundamental design making it easy for users to access the Internet.

However, users come across a common problem arising out of human or technical glitches. Users have experienced an error message while browsing through a site, reading ‘This site cannot be reached’. The error can hamper the smooth functioning of the user while conducting important tasks over the internet. This annoying error comes with different error codes, and there can be various reasons for the error to arise.

To be more specific, this site cannot be reached error occur due to internal Google Chrome settings, DNS server not responding, out-dated browser version as well as unsuitable TLS version. The error comes with an error message mentioning what went wrong. It is a minor error, and one can resolve it using some technical solutions.

How to Fix This Site Cannot Be Reached Error In Chrome

The solutions mostly refresh the system files to normalize the tasks of certain important functions of the operating system. This restores the settings and solves the error. Below describes the possible solutions to this site can’t be reached problem briefly.

Method 1: Changing Maximum Allowed TLS Version

TLS stands for transport layer security. It performs the task of providing communication security to the entire operating system while connected to the Internet. To be more specific, the system cryptographically communicates the data that transmits to the destination, ensuring security. This type of system is indeed essential to protect private data of the user, and it ensures secure browsing through the internet.

To resolve the problem, merely change the amount of data that transmits to the web browser. Perform the following steps for the same.

Step 1: In the first place, open Google Chrome browser using the administrator mode in your computer.

Step 2: Now, go to the address bar and type ‘chrome://flags’ and then press enter.

Step 3: Then scroll down until you find a drop-down option named ‘Maximum TLS version enabled.’

Step 4: Finally, press the drop-down arrow and set the allowed TLS settings to TLS 1.3 version. The browser was earlier running with the default version. You are good to go now.

Note: There is no save button to save the changed settings. Simply, change the settings and close the browser; the computer will automatically save the settings.

After this, restart the computer to let the new settings take effect. Try to open the webpage with the error ‘This site can’t be reached’ and check if the error persists or not.

Method 2: Disable Experimental QUIC Protocol

In computer language, QUIC is a new experimental protocol. QUIC stands for Quick UDP Internet connection. While opening various sites simultaneously, this experimental protocol QUIC provides security protection to TLS as well as SSL. It also provides a backbone while transferring the data from the website’s server to the computer and provides latency. Some websites use QUIC protocol and do not get filtered during transmission.

Disabling this protocol can actually resolve the error and open the concerned website smoothly. Use the following steps to disable QUIC protocol in your web browser.

Step 1: In the first place, open Google Chrome browser using the administrator mode in your computer.

Step 2: Now, type ‘chrome://flags’ in the address bar and then press enter.

Step 3: Then scroll down until you find a drop-down option named ‘Experimental QUIC protocol’.

Step 4: This must be set at the default version. Click the drop-down menu and select disabled.

Again, there is no save button. After performing the above steps, simply close the web browser. Then, restart your computer so that the new settings take effect.  Try to open the webpage with the error ‘This site can’t be reached’ and check if the error persists or not.

Method 3: Reset TCP/IP Stack

The cause of the problem might be the TCP/IP Stack. TCP/IP stands for transmission control protocol and internet protocol, respectively. Specifically, TCP/IP is a stack of communication protocols used to join the network devices together within the internet. It inculcates the entire internet protocol suite for the smooth functioning of the website user and the provider.

Resetting the TCP/IP Stack is a rather simple solution to resolve the error. Perform the following steps to reset the TCP/IP Stack.

Step 1: To begin with, log the computer on using the administrator mode. Then, Open the Command Prompt by pressing Win logo key + R simultaneously. A run dialog box will be visible on the screen. Type ‘cmd’ and press OK.

Step 2: The Command Prompt will appear on the screen. Now, you need to enter certain commands one by one, which will reset the TCP/IP stack. Enter the following commands chronologically.

ipconfig /release
ipconfig /all
ipconfig /flushdns
ipconfig /renew
netsh int ip set dns
netsh winsock reset

Step 3: After successfully running the above-mentioned commands simply restart the computer so that new settings take effect.

Note: The user should enter the above commands correctly with care; otherwise, there is a chance for some other error to arise.

Now, try to open the webpage with the error ‘This site can’t be reached’ and check if the error persists or not.

Method 4: Restart DNS Client

As mentioned above, one probable cause of this site can’t be reached error can be when the DNS client stops responding. DNS or Domain Name System or the Resolver – is a client built in most computers to issue the domain name queries to the required server. To put it differently, this client conducts the transmission of the query about the domain name. When the DNS server stops responding the error might arise.

Restarting the DNS client, thereby refreshing the client’s functions, can evidently solve the error. Perform the following steps for the same.

Step 1: To begin with, go to the start menu and search for ‘Services’ in the search bar.

Step 2: Right-click on the services option and choose Run as Administrator.

Step 3: Services window will appear on the screen. Various services offered by the operating system will be visible there. Scroll and find the service named ‘DNS Client’.

Step 4: Right-click on the option and select ‘Restart’.

This will restart the entire DNS client services and indeed resolve the problem. Once you complete the above steps restart the system so that the new settings take effect. Now, try to open the webpage with the error ‘This site can’t be reached’ and check if this site can’t be reached error persists or not.

Method 5: Change Your IPV4 DNS Address

The intricate design of IPV4 or Internet protocol version 4 performs mainly two tasks. It identifies the network interface and locates the concerned network to the destination. Internet protocol version 4 (IPv4) comprises of Internet protocol address with a 32-bit number.

Changing the DNS of IPv4 can do the wonder of solving the error. Follow the simple steps to perform the following.

Step 1: In the first place, Right-click on the Wi-Fi icon on the bottom left of the screen.

Step 2: From the two available options, select Open Network and Sharing Center.

Step 3: A new window will pop on the screen. Scroll down and select the ‘Change Network Adapter Settings’ under change your network settings.

Step 4: Network connections window will appear on the screen. Double click on the Wi-Fi icon.

Step 5: A window named Wi-Fi status will pop-up on the screen. From the lower end of the window, select Properties.

Step 6: Then, navigate for Internet Protocol Version 4 (TCP/IPv4) and double click it.

Step 7: Now, you need to change the DNS server addresses. Check ‘Use the following DNS server addresses’ if not checked and enter the below-mentioned addresses.

8.8.8.8 (under Preferred DNS network)

8.8.4.4 (under Alternate DNS network)

Step 8: Next, tick the checkbox ‘Validate settings upon exit’ if unchecked and press okay. Without checking this option, the new settings will not take place.

The above addresses are the Google public DNS server address. They will allow the IPv4 to work smoothly while browsing through Google Chrome. Finally, try to open the webpage with the error ‘This site can’t be reached’ and check if this site cannot be reached error persists or not. If the site does not open try the methods mentioned below.

Method 6: Reset Your Chrome Browser Settings

There might be a chance that you have changed the settings of the Google Chrome browser itself. For instance, adding a certain troublesome extension, unknowingly validating certain settings within the browser or changing the status quo. This might be restricting the browser to load the particular site.

Resetting the Google Chrome Browser settings can resolve the error and restore the settings to the status quo. In order to reset, simply perform the following steps.

Step 1: To begin with, open the Google Chrome browser using the administrator mode. This will allow us to make changes to the device.

Step 2: Now, type ‘chrome://flags’ in the address bar and then press enter.

Step 3: To reset the settings, click on the ‘Reset all to default’ option on the left.

Step 4: Finally, restart the computer so that the new settings can take effect.

Now, try to open the web page with the error ‘This site can’t be reached and check if this site can’t be reached error persists or not. If this does not work, perform the final solution described below.

Method 7: Reinstall Chrome

If the above solutions fail, then the final solution to the problem is reinstalling Google Chrome in your device. The best and final solution available will refresh the browser settings entirely, restore them and thereby resolve the error. To do so, execute the following steps.

Step 1: To begin with, press the windows button and open the ‘Control Panel’ of the device.

Step 2: Navigate for ‘programs and features’ and open it.

Step 3: All the applications installed on the computer will open. Locate Google Chrome.

Step 4: Finally, to uninstall Google Chrome, select it from the list and then click Uninstall.

Step 5: Now, reinstall Google Chrome on your computer. Visit the official website of Google Chrome and install the latest version in your device.

Now, open the newly installed browser and try to open the web page with this site can’t be reached error ‘This site can’t be reached’ and check if this site cannot be reached error persists or not.

Conclusion

The error “this site cannot be reached” can be annoying and hamper the smooth functioning of the user. However, point to note is that the functionalities of Google Chrome are barely at fault here. this site can’t be reached error occur out of certain inconceivable human or technical errors. Hopefully, the above-described solutions help resolve the issue and restore the Google Chrome browser to normalcy.

Categories
Windows

Your Connection is Not Private Error {Solved}

Firstly the error we are talking about in today’s article is named as “Your Connection Is Not Private in Chrome”. And also, we are going to provide you proper guidelines on not only how you can solve this error but also why is Your Connection is Not Private error occurring?

Nowadays the use technology is seen everywhere. Be it your business searching content or information on Google. People are so used to technology that they forget that internet also comes with various risk factors. And these risks can harm the personal data on your PC.

With day-to-day use of internet we come across many errors. The end-user of internet is mostly a common man. Some of the errors are easy to read, understand and solve, while some are not by the common man.

Why Your Connection Is Not Private Error Occur

This error usually occurs because of the in secure connection between two systems. Let’s understand this with an example, let’s say you visit a website. And while visiting you see this error appearing on the webpage. Which also means someone is trying to tamper your personal data, entered on that website. And this happens because the SSL connection is not secured. Here, SSL means Secure Socket Layer which acts as protective layer between you and the website. There are basically three possibilities why this error occurs.

  1. The SSL certificate is expired
  2. The SSL connection is not secured
  3. SSL certificate is not purchased from a trusted organization

If you want to check whether the SSL certificate is expired or not, you need to go to the URL tab and click on the lock sign you see. By doing this you will have the information whether the certificate is expired or not. If the connection isn’t secure the URL tab shows the message saying not secured.

Fix: Your Connection Is Not Private in Google Chrome

There is a five step process you need to follow to fix Your Connection Is Not Private error.

Solution 1 – Clear Browsing Data in Chrome

Half of the errors are solved when the junk is reduced from your computer. As a matter of fact same is the process with the internet. So the third method deals with the same scenario.

Steps to take are as follows:

Step 1: Go on the top-most right corner of your webpage.

Step 2: Click on the three vertical dots present on the screen.

Step 3: A dialog box will open showing various options.

Step 4: After the dialog box is opened go to the settings option.

Step 5: Go to the advanced settings option.

Step 6: Click the clear browsing data option.

Solution 2 – Correct the Date and Time

First and foremost is to verify the date and time of your PC is correct or not. Following should be done because while verifying the SSL certificate of the particular website. In addition to that it checks the date and time also. And if the date and time is incorrect, undoubtedly the error is going to occur.

Steps to take are as follows:

Step 1: Go to the respective PC settings.

Step 2: Go to the date, and time settings option. Step 3: After selecting the particular tab set the proper date and time.

Step 3: Don’t forget to refresh the web page.

Solution 3 – Scrutinize Your Antivirus Software and Firewall Settings

Moving to the second method, which says you should disable the option of  SSL/HTTPS scan in your particular Antivirus installed in your PC.

Generally you need to do this because when the option is enabled. And in the process of scanning it will scan the SSL certificate. And check if there is something wrong with it. And can also be the reason why this error occurs.

Steps to take are as follows:

Step1: Go the settings of your particular antivirus software installed in your PC.

Step 2: After opening settings tab disable the SSL/HTTPS scan option/mode.

Solution 4 – Use the Incognito Mode of Chrome

This error is commonly defined as insecure error, which means stealing someone’s private data. As we all know, internet is public and these things are ought to happen. In cyber security it is always a good practice to use incognito mode of browsing in chrome.

This method will work in the following way if we switch to incognito mode. And visit the website again and if it works error is solved. But if it is not, then certainly there is a problem with your extension. Extension is nothing but software which helps your browsing experience.

Steps to Take are as follows:

Step 1: Click on the top-most right corner.

Step 2: After opening the dialog box.

Step 3: Open the incognito mode in the chrome. Extensions installed in the browser should unchecked so that the error is resolved.

Solution 5 – Move To The Website With Insecure Connection.

Last but not the least, our last method is to move to the website with the insecure connection go the error page.

Step to take are as follows:

Step 1: Go to the advanced settings link present on the webpage.

Step 2: Click with go with the insecure connection option.

Well, your data is at a greater risk of stealing. But if you are sure that the website is secure enough to handle the data you can go with that option. But don’t forget it may be risky at times. So this was the last option. If all the above options work for you, you can also help others to come over Your Connection Is Not Private error.

Conclusion

Here, we have the five-step guide for the common man to solve the error “Your Connection is not private in Chrome”. We hope that your error is solved and satisfied with the content. Now you will be thinking these were such easy steps to take but we didn’t know. Internet is public but we can do very little to take the precautions. This is one of it. Be safe on internet.

Categories
Windows

Widevine Content Decryption Module (WidevineCdm) Error {Solved}

You must be familiar with the WidevineCdm or Widevine Content Decryption Module if you are a chrome user. It is a built-in plugin in Google Chrome. It comes packed with the module while installing the chrome for the first time. It helps in playing audios in the Google Chrome and DRM – protects HTML5 videos.

The Google Chrome users will receive the error if the Windows are missing any component or not up to date.

There are various ways to fix the Windows Content Decryption Module error. This guide is going to assist you in tacking this problem. Follow the steps appropriately and execute them with an alert mind.

Fix: Widevine Content Decryption Module (WidevineCdm) Error

Solution 1 – Updating Widevine Content Decryption Module

This plugin can be updated through the Google Chrome itself. Given below are steps to update the Widevine Content Decryption Module. Before starting this procedure, make sure you have launched the chrome in administration mode.

Step 1: First, right click on the Google Chrome icon.

Step 2: Select Run as Administrator from the list of options.

Step 3: After that, chrome will be launched in the administrator mode.

Step 4: Go to the address bar in the chrome and then type the address: chrome://components

Step 5: Press the enter key.

Step 6: Scroll down to the bottom of the page that opened. There you will find an entry with the name Widevine Content Decryption Module.

Step 7: Just underneath the Widevine Content Decryption Module entry, there will be a button Check for update. Click on the button.

Step 8: Refresh the page once you have done that.

The status below will change to up-to-date after you have carried out all the steps given above. It is indication that the Widevine Content Decryption Module Plugin is updated successfully.

Once done with that, restart your computer and check if the error is still there. If you still see the error, navigate below to the other methods to get rid of the error.

Solution 2 – Disabling Security Software

If you are using Windows 10, then you don’t need to install a third-party software for virus protection of your system as Windows 10 comes with a Windows Defender Security Center. This program prevent the Widevine Content Decryption Module from getting updated. But it must be noted that it is not because it is a corrupted program or a malware. The actual reason is in the new security features Microsoft has included in the Windows.

In its latest version, Windows do not install apps or files without the permission. This is the reason why when you try to update anything within chrome, you are supposed to turn off the real – time protection first which is within the Windows Defender Security Center. But in case you are using one of the third party Antivirus program, you should disable that before getting started with the update.

Although do not forget to re-enable the security software after the update of the component. We believe this will prevent the error but if it still shows, proceed with the guide further.

Solution 3 – Full Control to Edit Widevine Cdm Folder

If none of the above mentioned methods worked for you, you can now try changing the permission of the folder that is there on your computer. But you should have sufficient privileges before that. Or else, Windows User Account Control won’t allow you to update the plugin. You need to go to the plugin folder and then make sure your account has full control.

Once you are sure about that, you should try to update the plugin again using the Method 1 described earlier.

Follow the given steps:

Step 1: Firstly, press the Windows + R key together.

Step 2: Run Dialog box will appear. Type %user profile% appdata/local in the dialog box and then press the enter key.

Step 3: You will see the required folder on your computer screen.

Step 4: Now follow the path that is given below: Google >> Chrome >> User Data

Step 5: A new Window will open. Now find the folder WidevineCdm from the list of folders. Once you find the folder, right click on it and then select Properties.

Step 6: Now, go to the Security tab. Check that the login user has full access to the folder. Then, you can just see if there is a tick in front of Full Control in the properties.

If you do not have full control on the folder, follow the steps below:

Step 1: Select your profile.

Step 2: To modify the settings, click on Edit.

Step 3: Under the column of Deny next to Full control you will see a tick.

Step 4: Uncheck it.

Step 5: To save the changes made, click on Apply and Exit.

Your account will now get full access.

Step 6: Restart your system.

Step 7: Using Method 1, update your plugin and see if the error still pops out. If yes, proceed further.

Solution 4 – Delete WidevineCdm Folder

This step also require the administrative rights. So, before proceeding further ensure that you have been logged in as an administrator. Now, you can delete the plugins folder itself to get rid of the error. You can then reinstall it using Google Chrome. Steps to be followed are:

Step 1: First, press the Windows + R key together.

Step 2: Run dialogue box will appear. Type % userprofile % appdata / local in the Run dialog box and then press enter.

Step 3: The required folder will appear on your computer screen.

Step 4: Now navigate the path given below: Google -> Chrome -> User Data

Step 5: A new Window will open. Find the folder WidevineCdm from the list of the folders. Once you find it, right click on it and then click on Delete.

Step 6: Afterwards, choose Empty Recycle Bin by right clicking on the blank area in Recycle Bin.

Step 7: Now, press Windows + S key together.

Step 8: A search box will appear. Type Task Manager in the box.

Step 9: Then right click on the result that will appear and then select Run as Administrator.

Step 10: Now, right click on every chrome entry and then select End Task to end all the task related to chrome.

Step 11: You can now use Method 1 to update the plugin. It will update successfully now and the chrome will restart.

Step 12: Restart your System.

Try to play a video and see if the Widevine Content Decryption Module error still occurs. We hope not. But if it still doesn’t, navigate further into the guide.

Solution 5 – Re-Install the Chrome

If you have tried everything mentioned above then you have only one option left now – Reinstalling the chrome. It is the best option to remove stubborn errors. On uninstalling the chrome, all its modules will be deleted, so if there is any corrupted components, this will definitely fix the issue. Steps are:

Step 1: First, press the Windows + R key together.

Step 2: Run Dialog Box will open. Type app wiz.cpl in it.

Step 3: A window will open which will have the list of all the applications that are installed on your PC. Find Google Chrome and then right click on it. Now select Uninstall.

Step 4: Afterwards the uninstallation, open the official Google website to download and reinstall the latest version of Google Chrome Browser.

Conclusion

These were all the methods to remove Widevine Content Decryption Module error. Hopefully, one of them worked for you.

Categories
Windows

DNS_Probe_Finished_Bad_Config Error {Solved}

Google chrome is the most used browser on Earth. It is known for its butter user-friendly interface, Google ecosystem and butter smooth surfing experience. But while using Chrome you may have come across the DNS_Probe_Finished_Bad_Config Error. This error is mainly related to DNS service networks. In layman’s words, some bugs in the browser hinder an user from visiting certain web addresses. You may face this error while trying to access certain WebPages.

Many may say that DNS_Probe_Finished_Bad_Config error is only exclusive to chrome. But this type of errors may also appear in other well known browsers like Mozilla Firefox, Opera, and Internet Safari etc.

But no need to worry as in this article we will learn, on how to fix this problem. The steps or methods to be followed are as follows.

METHOD 1: Configure DNS manually

  1. Click on Start button and go to Control Panel.
  2. Open Network and Internet from the control panel list.
  3. Then select Network and sharing center.
  4. As the Network and sharing center appears select Change Adapter Settings.
  5. Right click on the current Internet connection in use.
  6. As the right click drop down list appears click on
  7. Again double left click on the Internet Protocol Version 4 (TCP/IP V4).
  8. See the DNS section consisting of Preferred DNS Address bar or Alternative DNS Address bar.
  9. It’s better to call up your service provider and ask him for the appropriate Preferred and Alternative address bar digits.
  10. If that is not possible type in, 8.8.8 in the Preferred Address Bar.
  11. And type in 8.4.4 in the Alternate Address Bar.
  12. Restart the computer and check if the error has been resolved or not, as the DNS of your computer has been modified manually this error should get resolved though this.

The same steps can also be performed via command prompt the steps to do the same via command prompt are as follows:-

  1. Click on the start button and type in cmd to start the command prompt.
  2. Then type in

pconfig /flushdns

This will flush away any error if present within the DNS network.

METHOD 2: Reset IP Configuration.  

  1. Click on the Windows Start button and type in cmd in the search bar.
  2. The black colored command prompt window appears.
  3. Then type in the following commands

netch int ip rest

netch winsock reset

ipconfig/ flushdns

ipconfig/ renew

  1. Finally reboot your computer to check if the issue has been resolved.

METHOD 3: Clear cookie, Cache and Temporary Files.

  1. Open your Google chrome browser.
  2. Open Setting from the top right hand site option.
  3. Then select History from the Setting’s List or you can directly open it by pressing ctrl+h.
  4. Click on all the type of things like History, temporary files, Cache memory to delete.
  5. Close the browser and re-open it to check if the error has been fix or not.

METHOD 4: Update Network Drivers.

DNS_Probe_Finished_Bad_Config error can occur if your network drivers are back-dated. Update your Network drivers to resolve it.

  1. Click on the Start button and type in Device Manager in the search bar.
  2. Select Device Manager from it. From it look for the different network drivers running.
  3. Check if any drivers can be updates.
  4. If any update is possible update the network drivers.
  5. Restart your computer to check if the issue has been resolved.

I this error is caused due to non-up gradation of any network driver, the error should have been resolved. If it still not resolved continue with the other methods below.

METHOD 5: Disable firewall and Anti-virus Programs

Sometimes the anti-virus or windows firewall installed in your computer may be main cause for the occurance of the DNS_Probe_Finished_Bad_Config error. Sometime anti-virus software and firewalls often block certain websites which might be harmful, resulting in the occurrence of DNS_Probe_Finished_Bad_Config error. So try disabling your anti-virus and observe if the error still persists or not.

If you want to disable the windows firewall, the necessary steps needed are as follows:

  1. Click on the Start and type in Defender and click on the first result to launch the Windows Defender Security Center.
  2. Now click on the virus protection and threat settings.
  3. Un-tick or un-check the Realtime protection option.
  4. Then again go to the start and then to control panel.
  5. From the control panel select System and Security
  6. Then click on the option of “Turn Firewall on or off”
  7. Turn off the firewall, from there.

Since both your anti-virus and firewall has been turned off, check if the problem has resolved or not.

METHOD 6: Disconnect and reconnect to the network.

This can be an issue of the Local Area network which you are using. Try disconnecting and then again reconnecting to the network. Often it happens that due to some bugs DNS_Probe_Finished_Bad_Config error appears. This can be avoided by restarting the network.

METHOD 7: Use a different browser

Though this DNS_Probe_Finished_Bad_Config error is not browser specific and is not only inclusive to Chrome. But using other browsers may resolve the issue. This type of error can also occur in other web browsers like Mozilla Firefox, Opera and Internet Safari. Try using a different browser and check if the issue still persists on the other browser as well.

CONCLUSION

This article provides you all the possible ways on how to fix the DNS_Probe_Finished_Bad_Config error. Undoubtedly, this error is a big headache for any internet user. But the best thing is that it can be ultimately resolved by following these easy steps.

The main problem arises due to some corrupt files or information in the DNS network system on your computer. It may also occur due to some third party anti-virus which may block a certain webpage or due to the own in-built windows firewall system or due to some incorrect IP address settings.

The seven methods mentions here are the permutation of all the steps possible to resolve this error.

Categories
Windows

DNS_PROBE_FINISHED_NXDOMAIN Error in Chrome [SOLVED]

We are living in 21st Century where life is greatly affected by Digital Components. As food, shelter, and cloth it also became one of our basic needs. With the development and enhancement of technology new gadgets are inventing day by day. But as all the things have some merits and some demerits. It also have some problems and error which frequently occurs in it. One of the major problem is DNS_PROBE_FINISHED_NXDOMAIN error. We also suggest you the different methods to fix DNS_PROBE_FINISHED_NXDOMAIN Error.

This Error occurs in various websites but more frequent in Google Chrome. One of the best and trusted web browser. This error arises mainly due to the wrong or incorrect configuration of the settings in the Internet. If these type of minor problems get frequently occurred in the computer then this article is very useful to you.

This DNS_PROBE_FINISHED_NXDOMAIN error can be easily resolved and fixed by applying some easy methods. By sitting on your computers and following some steps you can easily get rid out of this problem. In this content we are going to discuss major five easy methods to fix this problem.

Why DNS_PROBE_FINISHED_NXDOMAIN Error occur?

The DNS_PROBE_FINISHED_NXDOMAIN error occurs because of the misfiguration in the network. This is very popular Error which occurs frequently in your Google Chrome. It pops-up basically if your Internet Network or DNS settings have some issues. In this error you had frequently noticed that while searching any website the Google Chrome shows a message that is “This site can’t be reached and with this it also says “DNS_PROBE_FINISHED_NXDOMAIN”.

The main problem due to which this error occurs in Google is due to Settings and it is easily resolved by changing some settings. This problem gets resolved by applying a few easy methods.

DNS stands for Domain Name Servers which are responsible for redirecting a particular domain name to its IP Address. Apart from that this error also occurs if the IP Redirection fails or the servers is not able to complete its task properly. This error code basically for a Non-Existent Domain.

How to Fix DNS_PROBE_FINISHED_NXDOMAIN?

This error is the most common error and can be usually seen in and versions of Windows whether it is Windows 10, Windows 8.1, Windows 7 and even in the Android mobile phones. This is not a big problem it can be easily resolved by implementing on the following methods.

These are some of the easy and basic methods to solve the DNS_PROBE_FINISHED_NXDOMAIN error. They are the best and the proven methods, which definitely work.

Method 1: Resetting the Winstock Program

This is the very first and the easiest method to solve this error. By resetting the Winstock program this method can be easily and efficiently resolved. It is very easy to execute. One more advantage of this method is that it is very user friendly and works even in the worst cases.

Let us know, something about Winstock. It is a program interface which is usually used to handle the input and output requests particularly for the Internet Applications present in the Windows Operating Systems. This error even occurs if there is some misconfiguration in it.

This DNS_PROBE_FINISHED_NXDOMAIN error can be easily resolved by Resetting the Winstock. In order to do so we have to follow the following steps.

Step 1: First of all click on Windows button, search for CMD and finally select Command Prompt from the search result.

Step 2: After that Right click on it and select the Run as Administrator option.

Step 3: A Command Prompt will open feed the following command.

"netsh Winstock reset"

Step 4: Paste the above command and then click on Enter button.

Step 5: It takes very less time to execute and after that you receive a Success Messege shortly.

Step 6: The last step is to Restart the computer in order to see, if your changes is saved properly.

After processing the above method the DNS_PROBE_FINISHED_NO_INTERNET error is successfully solved. Also, during surfing from the Web browser the message would have disappeared.

Method 2: Using Command Prompt

In order to fix DNS_PROBE_FINISHED_NXDOMAIN error different commands are available to sort out this problem. Another important method is using the command prompt. This surely helps you to solve dns_probe_finished_nxdomain error. The following steps are taken in this method to solve this error.

Step 1: First, click on Windows key and search for CMD, then you see Command Prompt as the search result. After that right click on it and select on Run option.

Step 2: Now, the Command Prompt will open on the screen.

Step 3: Then type the following Commands on the screen:-

ip config /release

ip config /all

ip config /flushdns

After typing the following commands press Enter So, that these commands execute one by one.

Step 4: Once you successfully run all the commands then restart your computer and save changes.

Step 5: Finally check out by searching on the Internet. If this problem is solved or not. This method can be beneficial in solving many other internet related issues also.

Method 3: Changing the TCP/IP4 Proxy Settings by changing the Network Proxy Settings mainly the TCP/IP4 solve this error

It is very useful method, the steps proceeding in this method are as under:-

Step 1: Right click on the Windows button and select the Network connections options.

Step 2: After that, Right click on your Active Network connection that you are currently using after than choose the properties option.

Step 3: Then, select Internet Protocol Versions and (TCP/IPVP) from the list and then click on the properties button situated at the bottom right.

Step 4: Check the use below preferred and alternate DNS addresses after that Enter the given DNS setting in it.

Preferred DNS Server : 8.8.8.8

Alternate DNS Server : 8.8.4.4

Step 5: Finally, press the OK button to save the settings.

Method 4: Reset Chrome Flag Settings

It is very easy and quick method to resolve the error : DNS_PROBE_FINISHED_NXDOMAIN error in Google. The steps are as under :-

Step 1: First of all, copy or type in the URL given below and then paste it in the Google Chrome Address: Chrome://flags/

Step 2: After that hit Enter and Chrome will load the page on the screen.

Step 3: After that in settings page, on the right side. Reset all to the default option. Click on that option.

Step 4: By applying the above step you can easily reset all your Google Chrome settings and can fix the error.

Method 5: Restarting the DNS Client

If none of the above method will work, then we go for the last method which is restart the DNS client. The steps followed in resolving the DNS_PROBE_FINISHED_NXDOMAIN errors are as under:-

Step 1: At first, press CTRL+ R key simultaneously to open the run command.

Step 2: Type of services .msc and then click OK.

Step 3: After that a list of services will open. Scroll down and click on DNS client option.

Step 4: Finally, click on the restart option.

Step 5: Then restart the DNS client. This method will surely able to solve the problem successfully.

Conclusion

Here, are the 5 best methods which you can use to fix the DNS_PROBE_FINISHED_NXDOMAIN error on your Chrome browser. By applying these methods the problem is successfully resolved.

Hope this article is helpful to you.